Anker SOLIX F3800 vs BLUETTI AC500: Which Whole-Home Power Station Wins?
Updated November 2026
Quick answer
The Anker SOLIX F3800 is the better all-around pick for most households: a single box delivers 6,000W continuous and 9,000W surge from a 3,840Wh battery, enough to start a central AC compressor without any extra wiring. The BLUETTI AC500 is the better runner-up for buyers who want to grow storage gradually, since its modular B300S battery packs let you start small and scale past 18kWh over time.
Anker SOLIX F3800 vs BLUETTI AC500 at a Glance
| Spec | Anker SOLIX F3800 | BLUETTI AC500 |
|---|---|---|
| Battery architecture | Built-in 3,840Wh LiFePO4 | Separate inverter core + modular B300S packs (3,072Wh each) |
| Starting capacity | 3,840Wh (one box) | 3,072Wh (core + one B300S) |
| Max expandable capacity | ~7,680Wh with a second F3800 via Home Power Panel | 18,432Wh with six B300S packs |
| AC output (continuous) | 6,000W | 5,000W |
| Surge output | 9,000W | 10,000W (Power Lifting Mode) |
| 240V split-phase support | Yes, via Home Power Panel with two units | Yes, via Fusion Box Pro |
| Starting price | ~$1,999 (single unit) | ~$1,399 core unit (battery sold separately) |
| Best for | Simplest one-box whole-home setup | Buyers who want to scale storage gradually |
Both systems target the same buyer: someone who has outgrown a camping-style power station and wants a unit that can genuinely back up part of a house through a transfer switch or dedicated panel, not just charge phones and run a mini-fridge for an afternoon. The core difference is architectural. Anker bundles the battery and inverter into one sealed unit and scales by adding a second complete F3800. BLUETTI splits the inverter (the AC500 core) from the battery (B300S packs), so you buy only as much storage as you need today and bolt on more later without duplicating the inverter, display, or cooling system.
If you are still deciding whether a stacked system like either of these makes sense for your home at all, our guide to choosing between a portable and whole-house generator walks through when a battery-based system is the right call versus a fuel-burning standby generator.
Who Should Buy the Anker SOLIX F3800
The F3800 is the right choice if you want the fewest moving parts. One box, out of the box, delivers more continuous wattage than the AC500 core alone, and its 9,000W surge rating is high enough to start a 3-ton central AC compressor or a deep well pump — loads that trip most portable power stations, including many flagship units. For a single-unit setup, there is nothing to configure beyond plugging in your critical circuits.
The trade-off is how it scales. Going beyond one F3800 means buying an entire second $1,999 unit plus the Home Power Panel, which pushes a two-unit system well past what an equivalent amount of BLUETTI capacity would cost. If you are confident one unit covers your outage needs, that is not a problem. If you suspect you will want to double or triple your storage over the next few years, you are paying for a second inverter and enclosure every time, not just more battery.
We cover the F3800 in more depth, including real-world circuit load examples, in our full Anker SOLIX F3800 review, and we have also benchmarked it directly against another flagship competitor in our Anker SOLIX F3800 vs EcoFlow Delta Pro 3 comparison.
Check the current price of the Anker SOLIX F3800 before deciding, since Anker runs frequent bundle promotions that include solar panels or a second battery at a discount.
Who Should Buy the BLUETTI AC500
The AC500 makes the most sense for buyers who want to spread the cost of a large system over time, or who are not yet sure how much capacity they will ultimately need. Buying the core unit with a single B300S pack gets you a working whole-home-capable system for less upfront cash than an F3800, and each additional B300S you add later increases storage without requiring a second inverter, display, or set of ports. At the top end, six B300S packs give you 18,432Wh — more than double what two F3800 units provide, at a lower cost per watt-hour once you are a few packs in.
The catch is complexity and footprint. A fully stacked AC500 system with several B300S packs and a Fusion Box Pro takes up considerably more floor space than a single F3800, and the modular design means more cables, more connection points, and more things that can be configured incorrectly during a hurried outage setup. It is also worth noting the AC500's continuous output (5,000W) is lower than the F3800's 6,000W, so if continuous wattage for simultaneous large loads matters more than total stored energy, the F3800 still wins on that spec alone.
BLUETTI's approach to battery chemistry and voltage architecture mirrors what we cover in our explainer on 12V vs 24V vs 48V power station architecture, which is worth reading if you want to understand why both of these units run at 48V rather than the 12V or 24V systems common in smaller power stations.
Shop the BLUETTI AC500 core unit and the BLUETTI B300S battery module separately, since most retailers list them as independent products rather than a single bundle.
Capacity and Expansion: Two Different Philosophies
On paper, the F3800's 3,840Wh beats a single B300S's 3,072Wh, so an AC500 core plus one battery actually starts behind the F3800 on day one. The AC500's advantage only shows up once you start adding packs: a second B300S brings you to 6,144Wh for roughly the cost of one extra battery module, while matching that storage on the Anker side means buying an entire second F3800 at full price. If your plan is to start modest and grow over several years, the AC500's incremental cost curve is friendlier to your wallet.
If you already know you want maximum capacity on day one and do not plan to expand further, the calculus flips. Two F3800 units linked through the Home Power Panel give you automatic load balancing and transfer switching as a managed system, which is a meaningfully different (and more turnkey) experience than manually distributing circuits across several BLUETTI battery packs.
Surge Power and Starting Big Loads
Surge rating, not continuous wattage, is usually what determines whether either unit can start a motor-driven appliance. The AC500's 10,000W Power Lifting Mode edges out the F3800's 9,000W on paper, but both numbers comfortably cover the vast majority of residential compressor and pump start-up loads. Where the F3800 pulls ahead is continuous output once that load is running: 6,000W versus 5,000W matters if you are simultaneously running central AC, a refrigerator, and household lighting on the same system rather than just starting one appliance in isolation.
Price and Total Cost of Ownership
Sticker price favors the AC500 core unit, which lists for several hundred dollars less than a single F3800. But that number is misleading on its own, since the AC500 core has no usable capacity without at least one B300S pack added on. Once you price out an AC500 core plus one battery against a single F3800, the gap narrows considerably, and the two systems land closer to parity than the headline prices suggest. The AC500's real cost advantage shows up only at scale, when you are comparing a heavily expanded six-pack AC500 system against buying multiple full F3800 units.
It is also worth factoring in financing and promotions. Both Anker and BLUETTI run frequent sales around major shopping holidays and regularly bundle solar panels or an extra battery at a discount, so the gap between list price and what you actually pay can shift by several hundred dollars depending on timing. If your purchase is not urgent, watching for a bundle deal on either system is usually worth more than optimizing for the raw spec sheet.
Charging Speed: Wall, Solar, and Generator Input
Both units are built to accept input from multiple sources simultaneously, which matters during an extended outage when you want to top off from a generator during the day and trickle-charge from solar in between. The F3800 accepts up to roughly 1,500W from AC wall input alone, which can bring a single unit from empty to nearly full in a few hours, and it supports combined AC-plus-solar charging for faster recovery when both sources are available. The AC500 core supports a similarly high combined input ceiling across its AC, solar, and optional generator inputs, though total charging speed on the BLUETTI side depends on how many B300S packs you are charging at once, since more stored capacity naturally takes longer to refill at a fixed input wattage.
For solar charging specifically, both systems use MC4-style connectors and support strings of panels wired for higher voltage input, which is faster and more efficient than running several panels in parallel. If solar is a major part of your plan rather than a backup-only feature, sizing your array correctly makes a bigger difference to recovery time than which of these two units you choose.
Noise, Footprint, and Where to Put It
A single F3800 is roughly the size and weight of a large rolling suitcase, and it is designed to sit in one spot near your electrical panel or critical circuits rather than move frequently. Its cooling fans are noticeable but not disruptive under light load, and ramp up audibly when running near its continuous wattage ceiling. A fully expanded AC500 system with several B300S packs stacked next to the core unit and a Fusion Box Pro takes up meaningfully more floor space, closer to a small server rack than a suitcase, and you should plan for a dedicated utility area rather than expecting to tuck it into a closet. If floor space is tight, that footprint difference alone may be the deciding factor regardless of how the rest of the spec sheet compares.
Warranty and Long-Term Support
Anker backs the F3800 with a multi-year warranty on both the unit and its LiFePO4 battery, reflecting the fact that LiFePO4 cells are rated for thousands of charge cycles before meaningful capacity loss, and Anker has a long track record of honoring claims through its SOLIX support line. BLUETTI offers a comparable warranty window on the AC500 core and B300S packs, though because the system is modular, a failure in one battery pack does not take down the rest of your stored capacity the way a fault in a single-battery F3800 would take the whole unit offline. That modularity is a real reliability advantage for buyers who are especially risk-averse about a single point of failure during an extended outage.
Real-World Scenario: Which One Fits Your Situation
If you live somewhere with occasional multi-hour outages and want one appliance-sized box that can start your AC and keep the refrigerator and a few circuits running without any assembly, the F3800 is the simpler, more turnkey answer. If you live somewhere prone to multi-day outages — wildfire country, hurricane zones, or areas with an aging grid — and you would rather start with a smaller investment and add battery packs as your budget allows, the AC500's modular path lets you build toward a much larger system over a year or two instead of paying for all your capacity on day one. Renters and anyone who might relocate in the next few years should lean toward the F3800 for its simpler one-box portability, while homeowners planning a long-term off-grid or backup setup often get more value from the AC500's expansion ceiling over a five-plus year horizon.
Frequently Asked Questions
Both can, since each exceeds the roughly 6,000-8,000W surge that most 3-ton residential AC compressors need to start. The AC500's 10,000W Power Lifting Mode gives slightly more headroom on paper, but real-world starting performance depends more on your specific compressor than on this gap.
Not as a single managed system. Each brand uses its own proprietary expansion hardware (Home Power Panel for Anker, Fusion Box Pro for BLUETTI), so the two cannot be linked together for load balancing or automatic transfer switching, though you could run them as two separate independent backup circuits in the same home.
For true whole-home or partial-home backup through your breaker panel, yes, a licensed electrician should install the transfer switch or interlock. Either unit can also be used without an electrician simply by running extension cords to individual appliances, which avoids any panel work.
A single F3800 unit is easier to move since everything is in one enclosure, while a stacked AC500 system with multiple B300S packs is heavier overall and involves disconnecting and reconnecting several cables if you need to relocate it.
A standard refrigerator draws roughly 100-200W average, so a single F3800 (3,840Wh) or an AC500 with one B300S (3,072Wh) can both run a refrigerator alone for well over a day, with the AC500's modular design letting you add packs if you need to stretch that further. For a deeper breakdown of appliance runtimes, see our guide on connecting a power station to a transfer switch.